The hydraulic jack is designed for lifting turbo-prop and jet-powered aircraft weighing up to 32,000 lbs. With over 55 years of manufacturing experience, this equipment offers reliable and secure lifting solutions for airplanes and helicopters, meeting the demands of professional aviation maintenance.
Don't have an account? Register for an account here.
Overview
TriTask A700 Aircraft Jacks. The heavier piston, turbo-prop and jet powered aircraft weighing up to 32000 lb (14517 kg) are too valuable to consider using anything less than the A700 series Aircraft Jacks from Meyer hydraulics. For over 55 years, we have been manufacturing aircraft jacks that continue to set the standard for safe, dependable lifting at affordable prices. This series of professional hydraulic lifting equipment handles airplanes and helicopters with the security and features one should demand in an aircraft jack.
Features & Benefits
Inner slide tube the 3-1/2 in (89 mm) diameter powder-coated tube forms the foundation of the tritask aircraft jack system
Positive safety lock spring loaded safety pin pops into the inner slide tube and rests on top of the jack’s frame to prevent the accidental lowering of the aircraft
Low height leg design provides maximum gear door clearance
Six 3 in (76 mm) spring loaded casters allow easy transporting of the jack around the hanger without the need for the steel legs to scuff across the floor
Anti-snag round frame tube has a 4-1/2 in (73 mm) diameter
Two accessory tubes are provided to allow the operator to put in accessories or tools for on-board storage if desired
Leg floor pads each provide a 4 in x 2 in (10 x 5 cm) surface area for load distribution and to help prevent hanger floor surface damage
Don't have an account? Register for an account here.
Product information provided "as is", and Boeing may add, change, discontinue or remove product information at any time. Product photos may not be exact match to product delivered. Seeterms & conditions.
