Sherwin-Williams® Acry Glo® HS 830 Paint Seahawk Gray, 3/4 gal
Sherwin Williams
Part # A07489GL=PT
Hazmat
Hazmat
This high solid acrylic urethane paint in Seahawk Gray offers excellent coverage of 800 to 815 square feet per gallon. With low VOC content for quick evaporation, it dries in 20 minutes and can be recoated after 24 hours. The paint is packaged in a 3/4-gallon container.This high solid acrylic urethane paint in Seahawk Gray offers excellent coverage of 800 to 815 square feet per
Don't have an account? Register for an account here.
WARNING: This product can expose you to chemicals including ETHYLBENZENE, METHYL ISOBUTYL KETONE, METHYL ISOBUTYL KETONE (MIBK) and TITANIUM DIOXIDE (AIRBORNE, UNBOUND PARTICLES OF RESPIRABLE SIZE) which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Overview
Sherwin-Williams® Acry Glo® HS 830 Series high solid acrylic urethane paint is Seahawk Gray in color and has less than 3.5 pounds per gallons VOC contents that ensure quick evaporation. It has a specific gravity of 0.96 to 1.32, boiling point of 132 to 395 degrees F and a flash point of 3 to 72 degrees F TCC. This topcoat paint in a 3/4-gallon container, offers 800 to 815 square feet per gallon coverage per dry mil and 19.5 to 20 square meters per liter coverage per 25 micron. It takes 20 minutes to air dry, 3 hours to force dry and 24 hours to recoat. This liquid paint has a storage temperature range of 40 to 100 degrees F.
Features & Benefits
Excellent distinctness of image
Requires no clear coating
Will not chip off the surface
Devoid of lead and chromate hazards
Exhibits good buffing characteristics
Withstands chemicals and offers immense corrosion protection
Easily applied using conventional air spray equipment, HVLP or Graco Pro 4500 air electrostatic
Vapor density of 3.45 and a relative density of 1.03
Kinematic viscosity greater than 0.205 square centimeters per second at 104 degrees F
Uses carbon dioxide, foam and dry chemicals as fire extinguishing agents
Vapor pressure of 3 millimeters Hg at 20 degrees C
Delivers excellent gloss finish over the surfaces and retains the gloss even upon weathering
Dries out quickly
Specifications
Application
Striping as well as for overall painting of helicopters and small general aviation aircraft
Don't have an account? Register for an account here.
Product information provided "as is", and Boeing may add, change, discontinue or remove product information at any time. Product photos may not be exact match to product delivered. Seeterms & conditions.
