Don't have an account? Register for an account here.
Overview
SKYscapes® appearance enhancer CM0850AP8 is a high-performance transparent product designed to be used over SKYscapes® and SKYscapes® general aviation basecoats prior to clear coating. If offers the refinisher a final finish preview prior to the clear coat and can help eliminate costly rework.
Features & Benefits
Simple mixing ratio
Quick overcoat time with SKYscapes® base coat or clear coat
A wet on wet system or a 2 to 3 coat sandable, clear sealer
Improves overall appearance of the basecoat-clear coat system by - enhances clear coat low film wetting, improves the clear coat dry profile, wets finger marks and tape gum, Assists clear coat hold up on livery line edges and picture framing, wets general surface contamination
Ideal for small or large aircraft
Can be over coated with itself at any time
Ideal to protect mica and metallic finish repairs in paint process prior to clear coat
Specifications
Container Type: Can
Container Size: 1 gal
Form: Liquid
Composition: >=10 to <=25% 2-Methoxy-1-Methylethyl Acetate, >=10 to <=16% Methyl n-Amyl Ketone, >=10 to <=15% Methyl n-Propyl Ketone, <=5% n-Butyl Acetate, <1% Methyl Isobutyl Ketone
Dry Time: 1/2 to 24 hr (Air)
Density: 0.93 g/mL
Specific Gravity: 0.99
Viscosity: >20.5 sq-mm/s
VOC Content: 560 g/L
Coverage Area: 2676 sq-ft/gal per Dry mil, 32.8 sq-m/L per 25 um
Vapor pressure: 3.7 kPa
Relative density: 0.98
Vapor density: 3.45
Boiling Point: 102 deg C
Flash Point: 69.8 deg F
Evaporation Rate: 2.3
Flammability Limit: 13.1% Lower, 0.8% Upper
Application Method: Conventional Air Spray, HVLP Gravity or Siphon and Electrostatic Air Spray
Don't have an account? Register for an account here.
Product information provided "as is", and Boeing may add, change, discontinue or remove product information at any time. Product photos may not be exact match to product delivered. Seeterms & conditions.
