Shop
Adhesion Promoters
Our inventory of high-quality adhesion promoters can be applied to aircraft surfaces to enhance the bond strength of coatings and compounds to the aircraft surface. Shop our wide selection of adhesion promoters from brands like 3M, PPG Aerospace, Zip Chem, and Chemetall to help you achieve improved coating and sealant adhesion, enhance coating durability, and make your coating application processes more efficient. Be sure to pre-treat your materials with one of our high-performance adhesive promoters.1,875 results | Page 1 of 94
Sort By: Popularity
PPG Aerospace/PRC DeSoto® PR-148 Adhesion Promoter, Pint Bottle, Clear
PPG Aerospace PRC DeSoto
Mfr Part# PR148PT
PPG PR-1861 Adhesion Promoter, 1 oz Bottle
PPG Aerospace PRC DeSoto
Mfr Part# 1861XXXXCA001BT
PRC-DeSoto Adhesion Promoter, 1 pt Bottle, Clear
PPG 512X310 DeSoto Gray Chrome-Free Epoxy Primer (Includes Activator 910X533)
PPG Aerospace/PRC DeSoto Exterior Primer A/B GL Spec Kit 515X349GLKIT
DeSoto 515K011QTKT Primer, 2 qt, Liquid, Green, >=56 deg C Boiling Point, 10.93 lb/gal Density
AkzoNobel 454-4-1 Integral Fuel Tank Coating with Curing Solution CA-109, Yellow Color, 1 gal Kit
PPG 512X310 DeSoto Gray Chrome-Free Epoxy Primer (Includes Activator 910X533)
AkzoNobel® 454-4-1QTKT Integral Fuel Tank Coating Yellow 1 qt Container 454-4-1QTKT
DeSoto 528X310QTKT Conductive Coating, 175 to 312 deg F, Black, 10 qt, 9.1 lb/gal, Liquid, 1.09
DeSoto® 512X310BGLKIT Primer, Liquid, Gray
Frequently Asked Questions
What is an adhesion promoter?
Adhesion promoters are used in aerospace to enhance the bond strength of coatings and accelerate the adhesion of sealants. Adhesive promoters also prevent peeling and flaking, allow for a smoother, more uniform paint finish, and provide excellent resistance to extreme environmental effects in the aerospace industry.
What is adhesion promoter used for?
Adhesion promoters pre-treat surfaces before you coat them with primers, epoxies, and polyurethane paints or before sealants are applied to accelerate the adhesion process. Before an adhesion promoter for coating is applied, the area should be cleaned thoroughly with solvents to remove any dirt, grease, or lubricants that may be present. Adhesive promoters can then be applied using a brush, spray bottle, or with clean gauze.
Product information provided "as is", and Boeing may add, change, discontinue or remove product information at any time. Product photos may not be exact match to product delivered. See terms & conditions.