KIT: ELASTOMER,SILICONE,A/B,2LB, SYLGARD 170

Features
• Low viscosity
• Long working time
• Room temperature or heat accelerated cure
• Moderate thermal conductivity
• Enhanced flow and fill in narrow spaces and around complex geometries
• Rapid, versatile cure processing controlled by temperature
• Provides stress relief in applications where hard, rigid encapsulants can cause damage during thermal cycling
• Can be considered for uses requiring added flame resistance and MIL-spec applications
Specifications
• Container Size: 2 lb
• Base Type: Silicone
• Form: Liquid
• Color: Black/Off-White (Part A/B)
• Odor/Scent: Slight
• Composition: 0.01 to 0.22% Methylvinylcyclosiloxane (Part B)
• Curing Time: 24 hr at 25 deg C
• Specific Gravity: 1.37
• Flash Point: 214 deg F (Part A)
• Viscosity: 3000 sq-mm/s (Part A), 2000 sq-mm/s (Part B)
• Boiling Point: >95 deg F
• Temperature Rating: 77 deg F
• Relative Density: 1.35 (Part A), 1.33 (Part B)
• Dielectric Strength: 18 kV/mm
• Solubility: Insoluble (Part A)
• Dissipation Factor: 0.002 at 100 Hz
• Shelf Life: 695 days
• Thermal Conductivity: 0.277 Btu/hr-ft-deg F
• Resists: Flame
• Volume Resistivity: 5.6 x 10 to the Power of 17 Ohm-cm
• Application Method: Automated Mixing and Dispensing, Manual Mixing
• Suitable For Use With: Encapsulant or Potting Material