HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW
Hycom
Part # HTM6E1S2H=8G
This mobile hydraulic test stand system features dual output and is powered by an 11 kW electric motor. It offers user-friendly operation through a graphical panel or touch screen, and is designed for low maintenance costs. HYCOM also provides diesel-driven options that meet stringent emission standards.This mobile hydraulic test stand system features dual output and is powered
Don't have an account? Register for an account here.
Overview
The units are easy-to-operate using a panel with graphical layout or touch screen. As well as being easy-to-operate, maintenance costs are low, which in turn means lower total cost of ownership. HYCOM offers hydraulic test stand in electric driven and diesel driven configuration. The diesel driven units are available up to stage V and tier IV final emission standards.
Features & Benefits
Dual system (S2) - single system with two pressure and two return lines
Stainless steel reservoir of 240 liters with drain valve and filling cap
Axial piston pump variable stroke with proportional control of flow and pressure
Boost pump for closed loop circuit
Fluid contamination level NAS 1638 class 6 or better
Oil air cooler with low noise level suitable for tropical conditions
Open and closed loop configuration
Temperature and boost pressure shut down switches
Oil sample and calibration points
De-aeration / flushing valve
Operator panel with graphic layout, digital display with maintenance and failure indication given in cleartax
Weather proof cover for operator panel
Flow setting by potentiometer, display will indicate the value of actual flow
Pressure setting by push buttons + and -
3000 psi pre-selection push button
Hydraulic and electric components completely isolated from each other
Canopy out of steel, spray painted
Doors for easy maintenance
Heavy-duty frame with drip tray
Mineral-based
Specifications
Series: HT-E-3-6
Finish: Spray Painted
Length: 1660 mm
Material: Stainless Steel Reservoir
Voltage Rating: 380/420 V
Continuous Power Rating: 11 kW
Width: 840 mm
Height: 1200 mm
Phase: 3 ph
Frequency Rating: 50 Hz
Cable Length: 12 m
Noise Level: <75 dBA at 1 m
Output Current: 16 A
Flow Rate: 0 to 6 gpm
Size: 6 m Hose
Cooling Type: Oil-Air
Product Weight: 500 kg
Pressure Rating: 300 to 3000 psi at 3 to 6 gpm, 4000 psi at Reduced Flow
Technical Information
MIL-H-5606
MIL-H-83282 and MIL-H-87257
Application
For business jets and helicopters maintenance and overhaul checks of AMM/ATA chapter 29 filling and draining of aircraft reservoir flushing of aircraft hydraulic system to class 6 nas1638 or better hydraulic supply for rat tests with hycom ground check motor
Don't have an account? Register for an account here.
Product information provided "as is", and Boeing may add, change, discontinue or remove product information at any time. Product photos may not be exact match to product delivered. Seeterms & conditions.
