SHERWIN-WILLIAMS High Solid Epoxy Topcoat, Liquid, 4 hr (Set to Touch), 8 hr (Dry Hard)

MIL-PRF-22750G type II high solids epoxy topcoat is a 2.8 pounds per gallon VOC compliant high solids two component epoxy topcoat. This epoxy coating is intended for use as a topcoat for the interior of military ground equipment. This product is applied over specified epoxy primers.
Features
• Applied over specified epoxy primers
• Apply by conventional, air assisted airless or HVLP spray guns
Technical Information
• MIL-PRF-22750G Type II
Specifications
• Form: Liquid
• Dry Time: 4 hr (Set to Touch), 8 hr (Dry Hard)
• Relative Density: 1.54
• Shelf Life: 730 days
• Viscosity: <20.5 cSt at 104 deg F
• VOC Content: 2.8 lb/gal
• Vapor Pressure: 12.1 kPa
• Vapor Density: 2.48
• Boiling Point: 78 deg C
• Flash Point: 19.4 deg F
• Evaporation Rate: 5.6
• Composition: >=10 to <=25% Crystalline Silica, Respirable Powder, Calcium Carbonate, Epoxy Polymer, Methyl Ethyl Ketone, Titanium Dioxide, <=5% Methyl n-Amyl Ketone, Heavy Aromatic Naphtha, <=3% Cristobalite, Respirable Powder, Amorphous Precipitated Silica, <1% Naphthalene, Xylene, Mixed Isomers, <=0.3% Ethylbenzene
• Flammability Limit: 0.8% Lower, 10% Upper