KIT: ADHESIVE,EPOXY,A/B,QT, EPOCAST52AB,AIRBUS08-01-002-01

Epocasta 52-A/B epoxy laminating system is a two part material formulated for service up to 350 degrees F. Well-suited for fabrication and repair of graphite composites, the laminating system combines low temperature vacuum bag curing capability with good hot wet strength.
Features
• Good hot wet strength
• Good wetting, low viscosity
Specifications
• Container Size: 1 qt
• Form: Liquid
• Color: Blue/Brown (Hardener/Resin)
• Composition: 5 to 10% 1,2-Ethanediamine, N,N'-Bis{2-Aminoethyl)-Triethylenetetramine, 30 to 60% 4,4-Diaminodicyclohexylmethaiie Cycloaliphatic Amine, 1 to 5% Propenenitrile Polymer with Butadiene, Cyanomethylo\O[Piperazinyjethyla Min O] ButyI-Temiinated Propanenitrile Rubber, 1 to 5% Poi\[Oxy(Methyi-1.2-Ethanediyl)], Al Pha. -{2-Aminonielhylelhy 1)-Omega-(2-Flinitidmelhyl Ethoxy )- Diaminopolyproplyene Glycol (Resin), 30 to 60% Oxiranemethanamine N.N'-(Methy Ienedi-4,1 -Pheny 1 Ene )Bis LN-(Ox Irany Imethy 1)-Epoxy Resin, 10 to 30% Fomialdehyde, Polymer with (Chloromerhyl)Oxirane and 2-Methylphenolepoxy Cresol Novolac, 30 to 60% Oxiranemethanamine, N-F4-(Oxirany lmethoxy;')Phenyi]-N-(Oxirany Imethy 1)-Triglycidyl Ether of-P-Aminophenol (Hardener)
• Density: 1.1 g/cc
• Viscosity: 5000 cPs (Hardener)
• Specific Gravity: 1.2 (Hardener)
• Base Type: Epoxy
• Vapor Density: >1 (Hardener)
• Vapor Pressure: <1 mmHg (Hardener)
• Evaporation Rate: <1 (Hardener)
• Curing Time: 3 hr at 150 deg F, 2 hr at 200 deg F
• Shelf Life: 6 months