KIT: COATING,CONDUCTIVE,A/B/C,QT, CHO-SHIELD 2001

Parker Chomerics CHO-SHIELD® 2000 Series electrically conductive coatings provide a corrosion resistant conductive surface coating on aluminum or composite substrates. By reducing moisture penetration, CHO-SHIELD® 2000 Series coatings offer corrosion protection for enclosure flanges which mate with particular EMI shielding gaskets. These tough, urethane coatings offer a highly conductive interface which improves overall EMI shielding performance. When used as a coating on a composite or other non-conductive surface, they provide the conductivity necessary to achieve excellent shielding effectiveness while maintaining their electrical and mechanical stability in hostile environments. CHO-SHIELD® 2000 Series coatings are three-part, copper-filled urethane coating systems which have been formulated with special additives and stabilizers to maintain their electrical stability even at elevated temperatures which prevent aluminum surfaces from corroding in high humidity and/or marine environments. In addition, CHO-SHIELD® 2001 and 2003 contain soluble chromates to minimize the effects of galvanic corrosion of the aluminum substrate, even in the event of a coating scratch. The CHO-SHIELD® 2002 coating, mainly intended for composite substrates or as a 2001 repair coating, is chromate-free. CHO-SHIELD® 2003 is a dark pigmented version of CHO-SHIELD® 2001. The CHO-SHIELD® 2001 and 2003 coatings are designed to be used with CHO-SHIELD® 1091 primer on chromate conversion coated (MIL-DTL-5541 Type I, Class 3) aluminum substrates. CHO-SHIELD® 2002 is designed to be used with CHO-SHIELD® 1091 primer on non-aluminum substrates such as MIL-P-18177 glass-filled epoxy composites and will typically deliver 0.1 ohm/square surface resistance when cured for 2 hours at room temperature 21 degrees C followed by 30 min at 121 degrees C.
Features
• Three component urethane system
• Corrosion-resistant copper filler
• Exceptional mechanical properties -65 to 85 degrees C including abrasion and scratch resistance
• Excellent chemical-resistance, including jet fuel (JP8), hydraulic fluids and motor oil
• Pre-measured kit allows easy mixing of components in one container
• Significantly more cost-effective than silver filled epoxies
• Protects aluminum and graphite composite airframes from corrosion
• No degradation of shielding effectiveness after 500 hours of salt-fog
Technical Information
• ASTM D792
• ASTM D2240
• ASTM D3359
• ASTM B117/CEPS-0002
• ASTM D4060
• ASTM D1650
Specifications
• Series: CHO-SHIELD 2000
• Container Size: 1 qt
• Container Type: Can
• Color: Light Brown
• Specific Gravity: 1.6
• Temperature Rating: -65 to 85 deg C
• VOC Content: 543 g/L
• Shelf Life: 270  days
• Hardness Rating: 77 Shore A