Jet Glo Express™ Hardener, Liquid, Clear, 6 to 8 Air, 3 to 4 hr Force, 24 hr, 1 gal

Jet Glo Express™ is a high-performance, two-component polyester urethane, designed for exterior use on high-performance general aviation and commercial aircraft. This coating is qualified to MIL-PRF-85285E, Type I, Class H. Approval letter is available upon request.
Features
• Simple mixing ratio
• Fast drying time improves shop processing flow
• Same proven performance as Jet Glo®, but in a high solids system
• Good buffing characteristics
• Chemical-resistant, including Skydrol® and other hydraulic fluids
• Exhibits outstanding gloss and gloss retention upon weathering
• Excellent flow and leveling
• Excellent image sharpness (distinctness of image - DOI)
• Contains less than 3.5 pounds per gallon
Technical Information
• MIL-PRF-85285E Type I Class H Specified
Specifications
• Container Size: 1 gal
• Form: Liquid
• Color: Clear
• Composition: >=50 to <=60% Hexamethylene Diisocyanate Polymer, >=10 to <=21% Methyl n-Amyl Ketone, >=10 to <=25% Ethyl Acetate, <=9.6% Oxo-Decyl Acetate, <=9.6% 2-Ethylhexyl Acetate, <=5% Methyl n-Propyl Ketone, <=0.3% Methyl Isobutyl Ketone, <=0.3% Hexamethylene Diisocyanate
• Dry Time: 6 to 8 Air, 3 to 4 hr Force
• Recoating Time: 24 hr
• Specific Gravity: 0.99
• Viscosity: >20.5 sq-mm/s
• VOC Content: 442 g/L
• Coverage Area: 800 to 960 sq-ft/gal per Dry mil, 19.6 to 23.6 sq-m/L per 25 um
• Vapor pressure: 11.5 kPa
• Relative density: 0.99
• Vapor density: 3.04
• Boiling Point: 161.6 deg F
• Flash Point: 24 deg F
• Evaporation Rate: 3.91
• Flammability Limit: 0.76% Lower, 10.7% Upper
• Application Method: Conventional Air Spray Equipment, HVLP and Electrostatic Air Spray or Air Assisted Airless or Electrostatic
• Shelf Life: 2 years
• Storage Temperature: 40 to 100 deg F
• Product Weight: 8.24 lb/gal