Jet Glo Express™ Topcoat Paint, High Solid Polyester Urethane, Liquid, Blue (BAC5070), 1 gal

Jet Glo Express™ is a high performance, four-component polyester urethane, designed for exterior use on high performance general aviation and commercial aircraft. This coating is qualified to SAE International's AMS 3095 and MILPRF-85285E, Type I, Class H.
Features
• Fast drying
• Same proven performance as Jet Glo®, but in a high solids system
• Good buffing characteristics
• Chemical-resistant, including Skydrol® and other hydraulic fluids
• Superior stain resistance
• Exhibits outstanding gloss and gloss retention upon weathering
• Excellent flow and leveling
• Excellent Distinctness of Image (DOI)
• Very low HAPS content less than 2% by weight
• Free of lead and chromate hazards
Technical Information
• MIL-PRF-85285E Type I, Class H Qualified
• SAE AMS 3095
Specifications
• Series: 840
• Container Size: 1 gal
• Base Type: High Solid Polyester Urethane
• Form: Liquid
• Color: Blue (BAC5070)
• Composition: >=25 to <=50% Titanium Dioxide, >=10 to <=25% Methyl n-Amyl Ketone, <=3% Bis(Pentamethyl-4-Piperidyl)Sebacate, <=3% Amorphous Silica, <=3% Aluminum Hydroxide, <=3% Benzotriazole Dipentylphenol, <1% Xylene, Mixed Isomers, <=1% Methyl Pentamethylpiperidyl Sebacate, <=0.3% Ethylbenzene
• Flash Point: 113 deg F
• Boiling Point: 296.6 deg F
• Coverage Area: 800 to 960 sq-ft/gal
• Dry Time: 3 to 4 hr
• Evaporation Rate: 0.33
• Product Weight: 11.05 lb/gal
• Recoating Time: 24 hr
• Relative Density: 1.33
• Resists: Chemical, Skydrol and Other Hydraulic Fluid
• Shelf Life: 1095 days
• Specific Gravity: 1.33
• Storage Temperature: 40 to 100 deg F
• Vapor Density: 3.94
• Vapor Pressure: 0.51 kPa
• Viscosity: >20.5 cSt
• VOC Content: <3.5 lb/gal
• Volatile Volume: 37.3 %
• Application Method: Conventional Air Spray Equipment, HVLP, Electrostatic Air Spray, Air Assisted Airless Equipment
• Flammability Limit: 1.1% Lower, 7.9% Upper