PAINT: VESTAL WHI,GL, EXPRESS

Jet Glo Express™ is a high performance, four-component polyester urethane, designed for exterior use on high performance general aviation and commercial aircraft. This coating is qualified to SAE International's AMS 3095 and MILPRF-85285E, Type I, Class H.
Features
• Fast drying
• Same proven performance as Jet Glo®, but in a high solids system
• Good buffing characteristics
• Chemical-resistant, including Skydrol® and other hydraulic fluids
• Superior stain resistance
• Exhibits outstanding gloss and gloss retention upon weathering
• Excellent flow and leveling
• Excellent Distinctness of Image (DOI)
• Very low HAPS content less than 2% by weight
• Free of lead and chromate hazards
Technical Information
• MIL-PRF-85285E Type I, Class H Qualified
• SAE AMS 3095
Specifications
• Series: 840
• Container Size: 1 gal
• Coverage Area: 800 to 960 sq-ft/gal
• Dry Time: 3 to 4 hr
• Evaporation Rate: 0.33
• Flammability Limit: 1.1% Lower, 7.9% Upper
• Flash Point: 102.2 deg F
• Form: Liquid
• Recoating Time: 24 hr
• Relative Density: 1.53
• Shelf Life: 1095 days
• Specific Gravity: 1.53
• Storage Temperature: 40 to 100 deg F
• Vapor Density: 3.94
• Vapor Pressure: 0.51 kPa
• Viscosity: >20.5 cSt
• VOC Content: <3.5 lb/gal
• Volatile Volume: 29.5 %
• Boiling Point: 296.6 deg F
• Composition: >=25 to <=50% Titanium Dioxide, >=10 to <20% Methyl n-Amyl Ketone, <=3% Amorphous Silica, <=3% Aluminum Hydroxide, <=3% Bis(Pentamethyl-4-Piperidyl)Sebacate, <1% Xylene, Mixed Isomers, <=1% Methyl Pentamethylpiperidyl Sebacate
• Base Type: Polyester
• Application Method: Conventional Air Spray Equipment, HVLP, Electrostatic Air Spray, Air Assisted Airless Equipment
• Color: Vestal White
• Suitable For Use With: Jet Glo Express™ 840 Series Topcoat Paint
• Product Weight: 12.74 lb/gal