Jet Glo Express™ CM0840081GA Hardener, Can, 1 gal, Liquid, 24 hr, 1.14, >20.5 sq-mm/s, 42 g/L, 1.13

Jet Glo Express™ is a high-performance, multi-component polyester urethane for exterior use on high-performance light aircraft and commercial aircraft. This paint meets the performance requirements of MIL-PRF-85285 Revision C and D, AMS 3095, BMS 10-72, BAMS 565-009, Type II, Class A.

FEATURES
• Short drying time, (has a positive effect on the workflows)
• Proven and powerful like Jet Glo®, but in one high-solids system
• Good shock properties
• Resistant to chemicals, including Skydrol® and others hydraulic fluids
• Extremely dirt-repellent
• Exceptional shine and excellent gloss retention over long-time
• Excellent flow and balancing properties
• Excellent image sharpness (distinctness of image - DOI)
• Holds less than 3.5 lb VOC per gallon (420 g/L)
• Very low HAPS content <2% by weight
• No lead hazard and chromate

TECHNICAL INFORMATION
• SAE AMS3095 Certified

SPECIFICATIONS
• Series: 840
• Container Type: Can
• Container Size: 1 gal
• Form: Liquid
• Composition: >=90% Hexamethylene Diisocyanate Polymer, <=4.1% Methyl n-Amyl Ketone, <=0.3% Hexamethylene Diisocyanate
• Dry Time: 24 hr
• Specific Gravity: 1.14
• Viscosity: >20.5 sq-mm/s
• VOC Content: 42 g/L
• Coverage Area: 800 to 960 sq-ft/gal per Dry mil, 19.6 to 23.6 sq-m/L per 25 um
• Vapor pressure: 0.51 kPa
• Relative density: 1.13
• Vapor density: 3.94
• Boiling point: 296.6 deg F
• Flash Point: 102 deg F
• Evaporation Rate: 0.33
• Flammability Limit: 1.1% Lower, 7.9% Upper
• Application Method: HVLP and Graco Electrostatic Air Spray or Air Assisted Airless
• Shelf Life: 2 Years
• Storage Temperature: 40 to 100 deg F
• Product Weight: 9.45 lb/gal
• Domestic/Import: Domestic