Jet Glo® CM0578520QT Hardener, Can, 1 qt, Polyurethane Base, Liquid, 16 to 18 hr, 24 hr, 0.97, 0.97

Jet Glo® is a high-performance, multi-component polyester urethane, designed for exterior use on high-performance general aviation, business jet and commercial aircraft. Jet Glo® has outstanding high-gloss appearance, durability and Skydrol fluid-resistance with Sherwin-Williams® aerospace primers.

FEATURES
• A proven performance coating within the aviation industry for over 25 years
• Superior distinctness of image (DOI) and high gloss appearance
• long-term durability including outstanding color retention
• High-resistance to hydraulic jet fluid, fuel, salt and ultraviolet rays
• Easy mix ratio
• Levels to a smooth, easy-to-clean finish

TECHNICAL INFORMATION
• FAA-NR Approved

SPECIFICATIONS
• Series: 570
• Container Type: Can
• Container Size: 1 qt
• Base Type: Polyurethane
• Form: Liquid
• Composition: >=25 to <=42% Hexamethylene Diisocyanate Polymer, >=25 to <=50% n-Butyl Acetate, >=10 to <=25% Ethyl Acetate, <=0.3% Hexamethylene Diisocyanate
• Dry Time: 16 to 18 hr
• Recoating Time: 24 hr
• Specific Gravity: 0.97
• Viscosity: >20.5 sq-mm/s
• VOC Content: 584 g/L
• Coverage Area: 555 to 675 sq-ft/gal per Dry mil, 13.5 to 16.5 sq-m/L per 25 um
• Vapor pressure: 11.5 kPa
• Relative density: 0.97
• Vapor density: 3.04
• Boiling point: 161.6 deg F
• Flash Point: 24 deg F
• Evaporation Rate: 3.91
• Flammability Limit: 1.38% Lower, 10.7% Upper
• Application Method: Conventional Air Spray Equipment, HVLP and Graco Pro 4500 Air Electrostatic or Graco Pro 4500 Air Assisted Airless Electrostatic
• Shelf Life: 2 Years
• Storage Temperature: 40 to 100 deg F
• Product Weight: 8.09 lb/gal
• Domestic/Import: Domestic