Acry Glo® Hardener Catalyst, Liquid, 4 to 24 hr, 1.01, >20.5 sq-mm/s, 499 g/L, 1 qt Can

This specially formulated Acry Glo® metallic has been developed for the large application area where an extended wet edge is required. As with all metallic finishes, correct spray technique, properly adjusted spray equipment, good unimpeded lighting and viewing access is essential to attain even orientation.
Features
• Cool metallic finish
• A proven performance coating throughout in the aviation industry
• Extended wet-edge formula
• 2 or 3 singular coat application depending on color
• Quick drying
• High resistance to chipping
• May be over coated with any Sherwin-Williams® aerospace clear coat
Specifications
• Series: 571
• Container Type: Can
• Container Size: 1 qt
• Form: Liquid
• Composition: >=50 to <55% Hexamethylene Diisocyanate Polymer, >=25 to <=50% n-Butyl Acetate, <=3% Light Aromatic Hydrocarbons, <1% Trimethylbenzene, <=0.3% 1, 3, 5-Trimethylbenzene, <=0.3% 1, 2, 4-Trimethylbenzene
• Dry Time: 4 to 24 hr
• Specific Gravity: 1.01
• Viscosity: >20.5 sq-mm/s
• VOC Content: 499 g/L
• Coverage Area: 650 to 765 sq-ft/gal per Dry mil, 16 to 18.8 sq-m/L per 25 um
• Application Method: Conventional Air Spray, HVLP Gravity or Siphon and Electrostatic Air Spray
• Vapor pressure: 1.3 kPa
• Boiling Point: 123 deg C
• Relative density: 1
• Flash Point: 80.6 deg F
• Vapor density: 4
• Evaporation Rate: 1
• Flammability Limit: 0.7% Lower, 7.6% Upper
• Product Weight: 8.36 lb/gal
• Shelf Life: 2 years