Parker® CHO-BOND 1075 Conductive Sealant Kit, Cartridge, Tube, 1.5 oz Foil, 6 oz, Medium Paste, Gray

CHO-BOND 1075 is a silver-plated aluminum filled, one-component conductive silicone designed for use as a fillet, gap filler and seam sealant on electrical enclosures for EMI shielding or electrical grounding. Minimum recommended bond line for CHO-BOND 1075 is 0.010 in (0.25 mm). In addition, CHO-BOND 1075 may be used for EMI gasket repair, bonding, and attachment in applications where moderate strength (100 psi) is required. The silver aluminum filler of CHO-BOND 1075 provides excellent galvanic corrosion-resistance when applied to aluminum substrates. No volatile organic compounds (VOCs) and minimal shrinkage upon curing make CHO-BOND 1075 a good choice for a variety of commercial and military applications. CHO-BOND 1075's moisture cure silicone polymer system allows it to cure to the touch in 24 hr and provides a robust conductive and environmental seal over a wide range of application temperatures. For best adhesion results, CHO-BOND 1075 should be used in conjunction with CHOSHIELD 1086 primer. Typical applications include man portable electronics, radar and communication systems, EMI vents, military ground vehicles and shelters.

FEATURES
• One-component
• Silver-plated aluminum filler
• No VOCs
• Moisture cure silicone
• Light-weight
• Non-corrosive cure mechanism
• Dry medium paste
• Easy-to-use, no weighing or mixing required
• Excellent conductivity 0.01 ohm-cm outstanding galvanic corrosion-resistance against aluminum substrates
• Minimal shrinkage
• 15 min work life, rapid skin formation, 24 hr handling time, requires no pressure during curing, wide range of application temperatures. 1 week for full cure
• More coverage per gram of material, minimal weight added to assembly or vehicle
• No corrosive by-products generated during curing to damage substrate
• Can be used on overhead or vertical surfaces

TECHNICAL INFORMATION
• ASTM D792 Specified
• ASTM-D2240 Specified

SPECIFICATIONS
• Container Size: 1.5 oz Foil, 6 oz
• Container Type: Cartridge, Tube
• Color: Gray
• Form: Medium Paste
• Odor/Scent: Mild
• Composition: 35 to 70% Aluminum, 10 to 25% Polydimethylsiloxane, 5 to 15% Silver, 5 to 10% Octamethyltrisiloxane, 0.5 to 2% Trimethoxymethylsilane, <0.2% Octamethylcyclotetrasiloxane, <0.2% Methanol, <0.15% Titanium Dioxide
• Boiling point: 216 deg F
• Flash Point: 200 deg F
• Specific Gravity: >1
• Temperature Rating: -55 to 200 deg C
• Shelf Life: 183  Days
• Relative density: >1
• Shear Strength: 689 kPa
• Durometer: 81
• Coverage Area: 1375 sq-in
• Hardness: 81 Shore A
• Domestic/Import: Domestic

APPLICATIONS
• Man-Portable Electronics
• Radar and Communication Systems
• Emi Vents
• Military Ground Vehicles and Military Shelters Applications