Sandstrom Solid Film Lubricant, Liquid, Flat Dark Gray, Strong Solvent, -320 to +500 deg F

Sandstrom 9A dry film lubricant is a paint-like coating containing molybdenum disulfide and corrosion inhibiting pigments. This heat curing material prevents corrosion, galling, seizing and fretting. It is a low friction coating which exhibits long wear life when operated at -320 to +500 degrees F under loads exceeding 100000 psi. Sandstrom 9A should be applied where maximum wear life and corrosion protection from a dry film lubricant are required. Sandstrom 9A may be applied by brush, dip or spray method.

Features
• Excellent corrosion protection
• Chemical resistance
• Long wear life
• 9A Contains no graphite

Technical Information
• SAE AS5272 Type II

Specifications
• Series: E750
• Container Size: 1 qt
• Composition: 5 to 10% Ethanol, <1% Methyl Isobutyl Ketone, 15 to 20% Methyl Ethyl Ketone, 25 to 30% Toluene, 1 to 5% Terpanol, 1 to 5% Dibasic Lead Phosphite, 5 to 10% Antimony Trioxide, 5 to 10% Bisphenol A Epoxy Resin
• Color: Flat Dark Gray
• Form: Liquid
• Odor/Scent: Strong Solvent
• Flash Point: 23 deg F
• Temperature Rating: -320 to +500 deg F
• Viscosity: 40 to 46 s
• VOC Content: 5.55 lb/gal
• Shelf Life: 12 months
• Coverage Area: 660 sq-ft/gal

Applications
• For that are seldom lubricated once they leave the factory and permanent lubrication is desired Where operating pressures exceed the load-bearing capacities of ordinary oils and greases