OIL: COMPRESSOR,5GL, ROYCO 889

ROYCO 889 is a synthetic-based lubricant formulated for use in gas compression applications that require wide operating temperature range and minimum interaction between the lubricant and the process gas. This lubricant resist oxidation and thermal breakdown, extending the life of the compressor. ROYCO 889 lubricant protects the compressor by reducing friction and wear thus offers extended engine life. With its advanced synthetic blend, it maintains viscosity stability across the temperature range, ensuring consistent protection.

FEATURES
• Resist wash off by hydrocarbon gases and liquids
• Resist absorption into the gas phase and carry-over of the lubricant downstream
• Minimizes dilution effects due to insolubility of lubricants with hydrocarbons

BENEFITS
• Protects against corrosion
• Higher film-strength than traditional lubricants
• Fully compatible with most compressor component materials, including: seals, gaskets, hoses, etc.

SPECIFICATIONS
• Appearance: Liquid
• Color: Amber
• Odor: Mild
• Flash point: > 399 °F
• Relative density: 1.05
• Kinematic viscosity at 32 °F: 1250 mm²/s
• Kinematic viscosity at 104 °F: 131 mm²/s
• Kinematic viscosity at 212 °F: 25.2 mm²/s

APPLICATION
• ROYCO 889 is intended for the lubrication of flooded rotary screws and vane-type compressors processing natural gas, carbon dioxide, or other hydrocarbon gases
• ROYCO 889 may also be used as a cylinder lubricant for reciprocating compressors processing natural gas, carbon dioxide and other gases that require chemical resistance in an ISO 150 viscosity grade.

COMPATIBILITY

RECOMMENDED
Acetone, Alcohol, Asbestos, Butyl Dioxtol, Chlorinated Solvents, Glycol Ether, Neoprene, Epoxy Paint, Silicone Rubber, Toluene, Torlon (AMOCO), Vespal (DuPont), and Viton (DuPont)

APPLICATION DEPENDENT
Ethylene Glycol, Triethanolamine and Water

NOT RECOMMENDED
Gasoline, Glycerol, Heptane, Kerosene, Leather, Methanol and Oil-based paint