Scotch-Weld™ 7010410436 Acrylic Adhesive, 5 min, >=100 deg C (Part-A/B), Off-White (Part-A/B), 1:1

3M™ Scotch-Weld™ acrylic adhesive DP805 is a two-part acrylic adhesive specially formulated to bond many plastics, metals and oily metals. When using a duo-pak size adhesive, rely on 3M™ dispensing equipment for convenient and accurate metering, mixing and dispensing. Creates a strong bond on plastics and metals structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ acrylic adhesive DP805 also bonds metals and most other plastics. Recommended applications metalworking such as HVAC, appliance, sporting goods and specialty vehicles Sign manufacturing such as panel to frame bonding, trim attachment, letter bonding and frame assembly bonding plastics, composites and powder coats to metal typically used for larger parts where a longer open time is needed for assembly. The mix ratio for 3M™ Scotch-Weld™ acrylic adhesive DP805 is 1:1 for quick, precise dispensing. With an applied 3 min work life there is some opportunity for positioning and adjustments after the adhesive is applied. This adhesive reaches handling strength in approximately 140 min and is fully cured in 48 hr at 72 deg F. Easy adhesion with acrylic adhesives are two part methyl methacrylate adhesives (MMA) that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. Acrylic glues have several features that make them easier to use, including a faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a long shelf life.

FEATURES
• Creates strong bond with minimal or no surface prep required
• Resists many chemicals, water, humidity and corrosion
• Formulated to bond multi-material assemblies such as plastics, thermoplastics, composites and metals, including oily metals
• Medium viscosity allows controlled dispensing
• Strong adhesive can replace screws, rivets and welding

SPECIFICATIONS
• Series: DP805
• Container Size: 48.5 mL
• Container Type: Duo-Pak Cartridge
• Color: Off-White (Part-A/B)
• Form: Liquid (Part-A/B)
• Odor/Scent: Pungent Acrylic (Part-A/B)
• Composition: 60 to 90% Methyl Methacrylate, 1 to 30% Acrylic Polymer, 1 to 10% 3, 5-Diethyl-1, 2-Dihydro-1-Phenol-2-Propylpyridine (Part-A), 40 to 70% Methyl Methacrylate, 10 to 30% Synthetic Polymer, 5 to 15% Methacrylic Acid, 5 to 10% Acrylic Polymer (Part-B)
• Flash Point: 50 deg F (Part-A/B)
• Boiling Point: >=100 deg C (Part-A/B)
• VOC Content: 768 g/L (Part-A), 772 g/L (Part-B)
• Specific Gravity: 0.96 (Part-A), 1.03 (Part-B)
• Viscosity: 40000 to 60000 cPs (Part-A/B)
• Shelf Life: 9 months
• Temperature Rating: 60 to 80 deg F
• Applicable Materials: Ceramic, Glass, Hardboard, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon) and Wood
• Shear Strength: 3500 psi
• Curing Time: 8 to 24 hr
• Mixing Ratio: 1:1
• Application Time: 5 min
• Domestic/Import: Domestic

APPLICATIONS
• Construction
• Consumer Goods
• Electronics
• General Industrial
• Metalworking
• Signage
• Specialty Vehicle
• Transportation
• Woodworking