Castrol Brayco Mircronic 882 Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, Gallon Can

Castrol Brayco™ Micronic 882 is a red colored synthetic hydrocarbon hydraulic fluid ISO viscosity Grade 15 for aircraft, ordnance, and industrial use. It contains no VI improvers and, unlike conventional hydraulic fluids, is not subject to polymer breakdown under high shear conditions. It can be used as a replacement and make-up oil for MIL-PRF-5606, and it is also compatible with MIL-PRF-6083 in all proportions. Brayco Micronic 882 has a high flash and fire point, exceptionally high auto ignition point, and very low flame propagation. Its properties also include controlled rubber swell for long seal life, low foaming, excellent anti-wear, and good corrosion and oxidation stability. Brayco Micronic 745 is designed to operate over the temperature range of -40ºC to 205ºC (-40ºF to 401ºF)

APPLICATIONS
Brayco Micronic 882 is primarily designed as a fire-resistant hydraulic fluid for aircraft and missile use, but also has many industrial applications where fire and fluid toxicity are a hazard. Brayco Micronic 882 is a direct replacement for MIL-PRF-5606.

TECHNICAL INFORMATION
• Brayco Micronic 882 meets all requirements and is qualified under military specification MIL-PRF-83282D, Amendment 1
• Replacement and make-up oil for MIL-PRF-5606
• Compatible with MIL-PRF-6083 in all proportions

TYPICAL CHARACTERISTICS
• API Gravity, degrees (D 1298): 36.5
• Specific Gravity @ 16/16°C (60/60°F) (Table 3): 0.841
• Pounds per Gallon @ 16°C (60°F) (Table 8): 7.03
• Specific Gravity Variance (D 1298): 0.003 (0.008 Maximum)
• Kinematic Viscosity, cSt (D 445): • @ 205°C (400°F): 1.1 (1.0 Minimum) • @ 100°C (212°F): 3.5 (3.45 Minimum) • @ 40°C (104°F): 14.1 (14.0 Minimum) • @ -40°C (-40°F): 2100 (2200 Maximum) • @ -54°C (-65°F): 4200
• Pour Point, °C (°F) (D 97): -63 (-81) (-55 (-67) Maximum)
• Flash Point, COC, °C (°F) (D 92): 210 (410) (205 (401) Minimum)
• Fire Point, COC, °C (°F) (D 92): 250 (480) (245 (473) Minimum)
• Neutralization Number, mgKOH/g (D 664): 0.14 (1.0 Maximum)
• Evaporation Loss, % wt (FTM 350): 10.0 (20.0 Maximum) (6.5 hrs @ 205°C (400°F))
• Low Temperature Stability (FTM 3458): Pass (No gelling, clouding, crystallization, solidification or separation) (72 hrs @ -40°C (-40°F))
• Foam, Sequence I (D 892): • Tendency, ml: 10 (65 ml Maximum) • Stability, ml: 0
• Water by KFR, ppm (D 1744): 41 (100 Maximum)
• Evaporation Effect on Wick Flammability (FTM 352): 15 cycles (10 cycles Minimum)