BRACKET: BLD.VALVEHOSE&EMSCOMP, 600 SERIES

SPECIFICATIONS
• First Leg Cutout Width: 2.080 Inches Nominal
• Second Leg Chamfer Angle: 45.0 Degrees Nominal
• Second Leg Relationship To First Leg: Not Identical
• Second Leg Distance Between Hole Centers Along Length: 1.000 Inches Nominal
• First Leg Thickness: 0.057 Inches Minimum and 0.069 Inches Maximum
• First Leg Hole Diameter: 0.279 Inches Minimum and 0.288 Inches Maximum
• First Leg Distance From Edge To Hole Center Along Length: 0.300 Inches Nominal
• Material: Steel Comp 321 Or Steel Comp 347
• Second Leg Hole Diameter: 0.467 Inches Minimum and 0.477 Inches Maximum
• Second Leg Distance Between First and Second Hole Centers Along Width: 1.330 Inches Nominal
• Second Leg Thickness: 0.057 Inches Minimum and 0.069 Inches Maximum
• First Leg Distance Between Hole Centers Along Width: 2.675 Inches Nominal
• First Leg Style: Cut Out
• Second Leg Style: Chamfered Ends
• Second Leg Length: 3.040 Inches Nominal
• Second Leg Distance From Edge To Hole Center Along Width: 0.600 Inches Nominal
• Mounting Hole Type: Plain
• First Leg Length: 0.880 Inches Nominal
• Second Leg Distance Between Lower Hole Centers Along Width: 2.675 Inches Nominal
• First Leg Distance From Edge To Hole Center Along Width: 0.602 Inches Nominal
• First Leg Width: 3.880 Inches Nominal
• First Leg Angle: 90.0 Degrees Nominal
• Second Leg Width: 3.880 Inches Nominal
• First Leg Hole Arrangement Style: Two Holes
• Style Designator: Angle
• Second Leg Hole Arrangement Style: Three Holes
• Second Leg End Width: 3.120 Inches Nominal
• Second Leg Distance From Edge To Hole Center Along Length: 0.640 Inches Nominal
• First Leg Cutout Length: 0.500 Inches Nominal