3M™ Advanced Finishing Glaze, Solid (Part A), Liquid (Part B), 24 oz Tube

Two-component, self-leveling putty designed for use as a skin coat over plastic filler to fill pinholes, sand scratches, low areas and other imperfections. Two-component, self-leveling putty designed for use as a skin coat over plastic filler to fill pinholes, sand scratches, low areas and other imperfections. Ideal for final step over filler to provide a smooth surface for priming. Product is two-component consisting of glaze and hardener.
Features
• Cures tack-free in 30 minutes
• Easy sanding properties
• Flowable and brushable
Specifications
• Series: 05821
• Container Type: Tube
• Container Size: 24 oz
• Form: Solid (Part A), Liquid (Part B)
• Color: Off-White/Red (Part B/A)
• Odor/Scent: Slight Ester (Part A), Pungent Styrene (Part B)
• Composition: 30 to 60% Trade Secret Benzoyl Peroxide, 10 to 30% Trade Secret Benzoic Acid, C9-11-Branched Alkyl Esters, 10 to 30% Trade Secret Water, <=10% Trade Secret Ethylene Glycol, 1 to 10% Trade Secret Zinc Stearate, 1 to 5% Trade Secret Calcium Sulfate, <=5% Trade Secret Iron Oxide (FE2O3), <=5% Trade Secret Oxirane, Polymer with Methyloxirane, Monobutyl Ether, <=1% Trade Secret Ferric Ammonium Ferrocyanide, <=1% Trade Secret Ferric Ferrocyanide (Part A), 10 to 30% Trade Secret Limestone, 10 to 30% Trade Secret Styrene Monomer, 10 to 30 Trade Secret Polyester Resin, 7 to 13% Trade Secret Inert Filler, 3 to 7% Trade Secret Titanium Dioxide, 1 to 5 Trade Secret Synthetic Crystalline-Free Silica Gel, 1 to 5 Trade Secret Polyester Polymer, <3% Trade Secret Alumina Trihydrate, <3% Trade Secret Trimethylolpropane Triacrylate, <3% Trade Secret Zinc Phosphate, 0.5 to 1.5% Trade Secret Thickening Agent, <1% Trade Secret Quartz Silica, <1% Trade Secret Toluene, <0.2% Trade Secret Hydrotreated Light Paraffinic Distillates (Petroleum) (Part B)
• Density: 1.2 g/cm3 (Part A), 0.94 g/mL (Part B)
• Specific Gravity: 1.2 (Part A), 0.94 (Part B)
• Viscosity: 15000 to 25000 cPs (Part B)
• VOC Content: 0 to 120 g/L (Part A), 274 g/L (Part B)
• Vapor pressure: 4.3 mmHg (Part B)
• Vapor density: 3.6 (Part B)
• Boiling Point: 293 deg F (Part B)
• Flash Point: 111 deg C (Part A), 88 deg F (Part B)
• Applicable Materials: Galvanized Steel, Sanded Paint, Aluminum, Steel, SMC and Fiberglass