LPS® Corrosion Inhibitor 00516 Light Gray, 14 oz can

LPS® corrosion inhibitor provides 99+% heat-resistant zinc rich galvanized coating for metal protection. The tough, flexible layer resists chalking, yellowing, cracking or peeling. This inhibitor acts as a hot-dip galvanizing agent that electrochemically protects ferrous metals at both indoors and outdoors. This liquid inhibitor is light gray in color and comes in a 14-ounce can. This inhibitor has 0.76 MIR VOC contents that evaporate slowly without leaving any residues or stains. It takes 6 hours for curing and 3 to 5 minutes for drying. The corrosion inhibitor has a vapor pressure of greater than 1 kPa at 25 degrees C, boiling temperature rating of 133 degrees F and a specific gravity of 1.76 at 25 degrees C. This aromatic hydrocarbon odored inhibitor has a flash point of less than 73.4 degrees F, making it safe for use. It withstands temperature range of -40 to 750 degrees F. The corrosion inhibitor withstands a water temperature up to 212 degrees F and continuous dry heat up to 750 degrees F. It is ideal for air conditioning parts, antennas, bridges, chain link fences, docks, ducts, heating parts, machine housing and material handling equipment.

Features:

• Flexible coating will not yellow, chalk, crack or peel
• Ensures excellent rust protection on steel under aggressive conditions
• Protects in underwater
• Acceptable for use in Canadian food processing establishments
• Viscosity of 3000 to 4500 cSt
• Density of 14.71 grams per cubic centimeter and vapor density of greater than 1
• 0.9% LEL and 10.5% UEL flammability limit

Benefits:

• Suitable for use as a paint primer
• Use as a flash rust preventive on welded areas
• Ideal for newly welded surfaces, rusted surface, galvanized surface, off-shore rigs, outside storage tanks, pipes, plumbing, structural steel, tanks, transmission toners, pulley and chain cover

Applications:

• Air conditioning parts
• Chain link fences
• Ducts
• Heating parts
• Machine housing
• Material handling equipment
• Newly welded surfaces
• Outside storage tanks

Specifications:

• ASTM A-780
• NSN 8010-00-214-7241