Don't have an account? Register for an account here.
WARNING: This product can expose you to chemicals including ETHYLBENZENE, TITANIUM DIOXIDE (AIRBORNE, UNBOUND PARTICLES OF RESPIRABLE SIZE) and TOLUENE which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Overview
JetFlex® aircraft interior finish is a two component polyurethane-coating formulated for the finishing and refinishing of plastic and metal components within the cabin and cockpit of aircraft. JetFlex® meets the performance requirements of Boeing BMS 10-83N, type II and III.
Features & Benefits
Excellent film flexibility
Fast drying
Excellent hardness, mar and abrasion-resistance
Smooth or textured application with same coating
Excellent adhesion to plastic and metal substrates and to the recommended primer
Dry Time: 10 to 15 min (Touch), 30 to 60 min (Handle), 2 hr (Dry Through) Air Dry, 30 min Dry Through (Force Dry)
Density: 2.07 Vapor (Air=1), 1.3 Relative
Specific Gravity: 1.31 +/-0.3
Viscosity: >0.205 sq-cm/s
VOC Content: <6.1 lb/gal
Coverage Area: 432 sq-ft/gal Per Dry mil, 10.6 sq-m/L Per 25 Microns
Application Method: Conventional Air Spray Equipment, HVLP, Graco Pro 4500 Air Electrostatic or Graco Pro 4500 Air Assisted Airless Electrostatic Equipment
Applicable Materials: Plastic and Metal Substrates
Vapor Pressure: 12.1 kPa
Total Shelf Life: 2 Years
Storage Temperature: 40 to 100 deg F
Domestic/Import: Domestic
Technical Information
BMS 10-83N Type II and III
FAR/JAR 25.853
PROP65: Carbon Black and Toluene to Cause Cancer and Birth Defects or Other Reproductive Harm - www.P65Warnings.ca.gov
Don't have an account? Register for an account here.
DISCLAIMER: Product information provided “as is.” Boeing may add, change, discontinue or remove this information at any time. Product photos may not be exact match to product delivered. Seeterms & conditions.
