HSH Aerospace Finishes IP100SPQT Fine Filler, Tube, 1 qt, 1.6 to 1.62 kg/L, 60 to 70 g/L, 10 min
HSH Interplan USA Inc
Part # IP100SPQT=33
|
Mfr Part # INTERPLAN 100SP
This waterborne acrylic spatula filler is designed for repairing aircraft interior panels. It effectively fills surface porosity and light scratches on various materials, including honeycomb panels, polycarbonate, and metals. A primer may be required for optimal adhesion, making it suitable for a range of synthetic materials and composites.
Don't have an account? Register for an account here.
WARNING: This product can expose you to chemicals including CARBON BLACK (AIRBORNE, UNBOUND PARTICLES OF RESPIRABLE SIZE [= 10 MICROMETERS]) and TITANIUM DIOXIDE (AIRBORNE, UNBOUND PARTICLES OF RESPIRABLE SIZE) which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Overview
Waterborne one-component acrylic spatula filler for surface repair of Aircraft interior panels. Interplant 100 SP fine shows excellent performance on honeycomb panels, polycarbonate, PES, composites and most commonly used synthetic materials, as well as on metals. Interplant 100 SP Fine is specially formulated to fill up general surface porosity and/or light scratches. In some cases, a primer must be applied first to assure a good adhesion of the filler.
Features & Benefits
Water-borne
One-component, ready-to-use
Convenient packaging in 200 g toothpaste-like tubes
Fast drying
Can be sanded by hand
Wet sanding possible
Can be tinted in grey for easier application on white substrates
Clean dry with Scotch Brite red type a very fine
Remove dust by using air pressure or clean cloth
Degrease with isopropanol or other approved solvent
Check result with water-break test (water drop has to spread out)
Prior to the application of the interplant 100 SP fine a thin layer of interplant 750 PC or 750 M may be sprayed to improve the adhesion and to obtain an easier spreading of the filler
Specifications
Container Type: Tube
Container Size: 1 qt
Density: 1.6 to 1.62 kg/L
VOC Content: 60 to 70 g/L
Dry Time: 10 min
Shelf Life: 183 Days
Temperature Rating: 15 to 35 deg C
Domestic/Import: Domestic
Technical Information
AIMS 04-30-001 Approved
FAR25.853
BAC 5322 Approved
MEP 10-074 Certified
Application
Apply With Clean
Plastic or Metal Spatula in Consecutive Layers With Sanding in Between
Don't have an account? Register for an account here.
Product information provided "as is", and Boeing may add, change, discontinue or remove product information at any time. Product photos may not be exact match to product delivered. Seeterms & conditions.
