HYCOM Dual Output Diesel Engine Driven Mobile Hydraulic Test Stand System, 186 kW
Hycom
Part # HT2000-1FS2X350=8G
Hazmat
Hazmat
This mobile hydraulic test stand system features a user-friendly panel or touch screen for operation. Designed for low maintenance costs, it is available in both electric and diesel configurations, meeting stage V and tier IV final emission standards. The unit delivers a power output of 186 kW for various applications.
Don't have an account? Register for an account here.
Overview
The units are easy-to-operate using a panel with graphical layout or touch screen. As well as being easy-to-operate, maintenance costs are low, which in turn means lower total cost of ownership. HYCOM offers hydraulic test stand in electric driven and diesel driven configuration. The diesel driven units are available up to stage V and tier IV final emission standards.
Features & Benefits
Dual system (S2) - single system with two pressure and two return lines with shutoff valves, side 1 output 3000 psi, side 2 output 5000 psi, full automatic safety feature to avoid applying 5000 psi on 3000 psi aircrafts
Stainless steel reservoir of 240 liters with drain valve and filling cap
Axial piston pump variable stroke with proportional control of flow and pressure
Boost pump for closed loop circuit
Fluid contamination level NAS 1638 class 6 or better
Oil air cooler with low noise level suitable for tropical conditions
Open loop configuration for filling and draining of A/C reservoir and RAT tests
Temperature and boost pressure shut down switches
Oil sample point
De-aeration / flushing valve
Operator panel with graphic layout, digital display with maintenance and failure indication given in cleartax
Weather proof cover for operator panel
Flow setting by potentiometer, display will indicate the value of actual flow
Pressure setting by push buttons + and -
3000/5000 psi pre-selection push button
Hydraulic and electric components completely isolated from each other
Canopy out of steel, spray painted with phosphate ester-resistant paint
Doors for easy maintenance
Heavy-duty frame with drip tray
Lifting points, tie down and fork lift pick-up points
Specifications
Series: HT2000-F
Finish: Spray Painted
Length: 3800 mm
Material: Stainless Steel Reservoir
Continuous Power Rating: 186 kW at 1800 rpm
Width: 2250 mm
Height: 1940 mm
Cable Length: 12 m
Noise Level: <83 dBA at 1 m
Output Current: 250 A
Flow Rate: 0 to 50 gpm
Size: 10 m Hose
Cooling Type: Oil-Air
Product Weight: 4500 kg
Pressure Rating: 300 to 5000 psi at 50 to 55 to 60 gpm
Application
For mainline aircrafts maintenance and overhaul checks of AMM/ATA chapter 29 filling and draining of aircraft reservoir flushing of aircraft hydraulic system to class 6 nas1638 or better hydraulic supply for rat tests with hycom ground check motor
Don't have an account? Register for an account here.
DISCLAIMER: Product information provided “as is.” Boeing may add, change, discontinue or remove this information at any time. Product photos may not be exact match to product delivered. Seeterms & conditions.
