Shop

Support Home
Help Topics
Contact Support
Overview
Features & Benefits
Specifications
Technical Information
Shipping Details

EPOXY TOPCOAT,HS SEAFOAM GREEN, 24533 MIL-PRF-22750F

Sherwin Williams

Part # F92G227GL=3X

Hazmat
Forecastable
Hazmat
Forecastable
Buy now from
Boeing Distribution (formerly Aviall)

Overview

MIL-PRF-22750G type II high solids epoxy topcoat is a 2.8 pounds per gallon VOC compliant high solids two component epoxy topcoat. This epoxy coating is intended for use as a topcoat for the interior of military ground equipment. This product is applied over specified epoxy primers.

Features & Benefits

  • Applied over specified epoxy primers
  • Apply by conventional, air assisted airless or HVLP spray guns

Specifications

  • Form: Liquid
  • Dry Time: 4 hr (Set to Touch), 8 hr (Dry Hard)
  • Relative Density: 1.54
  • Shelf Life: 730 days
  • Viscosity: <20.5 cSt at 104 deg F
  • VOC Content: 2.8 lb/gal
  • Vapor Pressure: 12.1 kPa
  • Vapor Density: 2.48
  • Boiling Point: 78 deg C
  • Flash Point: 19.4 deg F
  • Evaporation Rate: 5.6
  • Composition: >=10 to <=25% Crystalline Silica, Respirable Powder, Calcium Carbonate, Epoxy Polymer, Methyl Ethyl Ketone, Titanium Dioxide, <=5% Methyl n-Amyl Ketone, Heavy Aromatic Naphtha, <=3% Cristobalite, Respirable Powder, Amorphous Precipitated Silica, <1% Naphthalene, Xylene, Mixed Isomers, <=0.3% Ethylbenzene
  • Flammability Limit: 0.8% Lower, 10% Upper

Technical Information
  • MIL-PRF-22750G Type II

Technical Information

FAA Approval Code

N/R

Country of Origin

United States

Harmonized Tariff Schedule Code

3209900000

Lead Time (Days)

12

Shelf Life

Yes

UN Code

1263

Total Shelf Life (Days)

730

Forecasted

No

Shipping Details

Hazmat Code

GPP

ECCN

EAR99

Schedule B

3209900000

8130-3 Eligible

No

Hazmat

Yes

Part Explosive

No
Buy now from
Boeing Distribution (formerly Aviall)
DISCLAIMER: Product information provided “as is.” Boeing may add, change, discontinue or remove this information at any time. Product photos may not be exact match to product delivered. See terms & conditions.