This two-part polysulfide sealant is designed for use in access doors of fuel tanks and pressurized cabins. It cures into a flexible, fuel-resistant rubber that effectively fills irregularities between surfaces. The thixotropic paste is easy to apply and remains flexible in low temperatures, resisting various fuels and weather conditions.This two-part polysulfide sealant is des
Don't have an account? Register for an account here.
WARNING: This product can expose you to chemicals including CARBON BLACK (AIRBORNE, UNBOUND PARTICLES OF RESPIRABLE SIZE [= 10 MICROMETERS]), SILICA, CRYSTALLINE (AIRBORNE PARTICLES OF RESPIRABLE SIZE) and TITANIUM DIOXIDE (AIRBORNE, UNBOUND PARTICLES OF RESPIRABLE SIZE) which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Overview
CS 3330 is used as an access door sealant for integral fuel tanks and pressurized cabins, as a strippable fillet, and as a gasket for removable parts. CS 3330 is a two-part, polysulfide compound designed to seal access areas where easy separation of joint surfaces is required. CS 3330 cures by a chemical reaction at room temperature to a firm, flexible rubber. Cured CS 3330 has low adhesion and forms a fuel-resistant gasket that molds itself to fill all irregularities between two surfaces. Mixed, CS 3330 is a red thixotropic paste which is easily applied with an extrusion gun or spatula, but will not flow from vertical or overhead surfaces. The cured sealant is resistant to aircraft fuels, lubricants, oils, water and weather and remains flexible at low-temperatures.
Don't have an account? Register for an account here.
Product information provided "as is", and Boeing may add, change, discontinue or remove product information at any time. Product photos may not be exact match to product delivered. Seeterms & conditions.
