Don't have an account? Register for an account here.
Overview
Jet Glo® is a high-performance, multi-component polyester urethane, designed for exterior use on high-performance general aviation, business jet and commercial aircraft. Jet Glo® has outstanding high-gloss appearance, durability and Skydrol fluid-resistance with Sherwin-Williams® aerospace primers.
Features & Benefits
A proven performance coating within the aviation industry for over 25 years
Superior distinctness of image (DOI) and high gloss appearance
long-term durability including outstanding color retention
High-resistance to hydraulic jet fluid, fuel, salt and ultraviolet rays
Easy mix ratio
Levels to a smooth, easy-to-clean finish
Specifications
Series: 570
Container Type: Can
Container Size: 1 qt
Base Type: Polyurethane
Form: Liquid
Composition: >=25 to <=42% Hexamethylene Diisocyanate Polymer, >=25 to <=50% n-Butyl Acetate, >=10 to <=25% Ethyl Acetate, <=0.3% Hexamethylene Diisocyanate
Dry Time: 16 to 18 hr
Recoating Time: 24 hr
Specific Gravity: 0.97
Viscosity: >20.5 sq-mm/s
VOC Content: 584 g/L
Coverage Area: 555 to 675 sq-ft/gal per Dry mil, 13.5 to 16.5 sq-m/L per 25 um
Vapor pressure: 11.5 kPa
Relative density: 0.97
Vapor density: 3.04
Boiling point: 161.6 deg F
Flash Point: 24 deg F
Evaporation Rate: 3.91
Flammability Limit: 1.38% Lower, 10.7% Upper
Application Method: Conventional Air Spray Equipment, HVLP and Graco Pro 4500 Air Electrostatic or Graco Pro 4500 Air Assisted Airless Electrostatic
Don't have an account? Register for an account here.
DISCLAIMER: Product information provided “as is.” Boeing may add, change, discontinue or remove this information at any time. Product photos may not be exact match to product delivered. Seeterms & conditions.
