This clear polyurethane stabilizer is designed for large application areas, providing an extended wet edge for metallic finishes. Proper spray technique, equipment adjustment, and adequate lighting are crucial for achieving an even finish. It comes in a 1 pint container, suitable for various projects requiring a metallic look.This clear polyurethane stabilizer is designed for l
Don't have an account? Register for an account here.
Overview
This specially formulated Acry Glo® metallic has been developed for the large application area where an extended wet edge is required. As with all metallic finishes, correct spray technique, properly adjusted spray equipment, good unimpeded lighting and viewing access is essential to attain even orientation.
Features & Benefits
Cool metallic finish
A proven performance coating throughout in the aviation industry
Extended wet edge formula
2 or 3 singular coat application depending on color
Quick drying
High-resistance to chipping
May be over coated with any Sherwin Williams® aerospace clear coat
Specifications
Series: 571
Container Size: 1 pt
Coverage Area: 650 to 765 sq-ft/gal Per Dry mil, 16 to 18.8 sq-m/L Per 25 um
Dry Time: 4 to 24 hr
Evaporation Rate: 1
Flammability Limit: 1.38% Lower, 7.6% Upper
Flash Point: 83 deg F
Form: Liquid
Relative Density: 0.91
Shelf Life: 1095 days
Specific Gravity: 0.92
Storage Temperature: 40 to 100 deg F
Vapor Density: 4
Vapor Pressure: 1.3 kPa
Viscosity: >20.5 sq-mm/s
VOC Content: 781 g/L
Boiling Point: 253.4 deg F
Composition: >=75 to <=90% n-Butyl Acetate
Application Method: Air Spray Equipment, Graco Electrostatic Air Spray and HVLP
Don't have an account? Register for an account here.
Product information provided "as is", and Boeing may add, change, discontinue or remove product information at any time. Product photos may not be exact match to product delivered. Seeterms & conditions.
