Parker CHO-BOND 1075 Conductive Sealant Kit, Cartridge, Tube, 1.5 oz Foil, 6 oz, Medium Paste, Gray
Chemicals Misc
Part # CH0B0ND1075=33
Hazmat
Forecastable
Hazmat
Forecastable
This conductive silicone sealant is designed for electrical enclosures, providing EMI shielding and grounding. It features a silver-plated aluminum filler for corrosion resistance and cures within 24 hours. Suitable for various applications, it can be used for gasket repair and bonding, particularly in military and commercial settings.This conductive silicone sealant is designe
WARNING: This product can expose you to chemicals including TITANIUM DIOXIDE (AIRBORNE, UNBOUND PARTICLES OF RESPIRABLE SIZE) and TOLUENE which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Overview
CHO-BOND 1075 is a silver-plated aluminum filled, one-component conductive silicone designed for use as a fillet, gap filler and seam sealant on electrical enclosures for EMI shielding or electrical grounding. Minimum recommended bond line for CHO-BOND 1075 is 0.010 in (0.25 mm). In addition, CHO-BOND 1075 may be used for EMI gasket repair, bonding, and attachment in applications where moderate strength (100 psi) is required. The silver aluminum filler of CHO-BOND 1075 provides excellent galvanic corrosion-resistance when applied to aluminum substrates. No volatile organic compounds (VOCs) and minimal shrinkage upon curing make CHO-BOND 1075 a good choice for a variety of commercial and military applications. CHO-BOND 1075's moisture cure silicone polymer system allows it to cure to the touch in 24 hr and provides a robust conductive and environmental seal over a wide range of application temperatures. For best adhesion results, CHO-BOND 1075 should be used in conjunction with CHOSHIELD 1086 primer. Typical applications include man portable electronics, radar and communication systems, EMI vents, military ground vehicles and shelters.
Features & Benefits
One-component
Silver-plated aluminum filler
No VOCs
Moisture cure silicone
Light-weight
Non-corrosive cure mechanism
Dry medium paste
Easy-to-use, no weighing or mixing required
Excellent conductivity 0.01 ohm-cm outstanding galvanic corrosion-resistance against aluminum substrates
Minimal shrinkage
15 min work life, rapid skin formation, 24 hr handling time, requires no pressure during curing, wide range of application temperatures. 1 week for full cure
More coverage per gram of material, minimal weight added to assembly or vehicle
No corrosive by-products generated during curing to damage substrate
Can be used on overhead or vertical surfaces
Specifications
Container Size: 1.5 oz Foil, 6 oz
Container Type: Cartridge, Tube
Color: Gray
Form: Medium Paste
Odor/Scent: Mild
Composition: 35 to 70% Aluminum, 10 to 25% Polydimethylsiloxane, 5 to 15% Silver, 5 to 10% Octamethyltrisiloxane, 0.5 to 2% Trimethoxymethylsilane, <0.2% Octamethylcyclotetrasiloxane, <0.2% Methanol, <0.15% Titanium Dioxide
Boiling point: 216 deg F
Flash Point: 200 deg F
Specific Gravity: >1
Temperature Rating: -55 to 200 deg C
Shelf Life: 183 Days
Relative density: >1
Shear Strength: 689 kPa
Durometer: 81
Coverage Area: 1375 sq-in
Hardness: 81 Shore A
Domestic/Import: Domestic
Technical Information
ASTM D792 Specified
ASTM-D2240 Specified
Application
Man-Portable Electronics
Radar and Communication Systems
Emi Vents
Military Ground Vehicles and Military Shelters Applications
Product information provided "as is", and Boeing may add, change, discontinue or remove product information at any time. Product photos may not be exact match to product delivered. Seeterms & conditions.
