The A725B Aircraft Jack from Meyer Hydraulics is designed for turbo-prop and jet-powered aircraft weighing up to 32,000 lbs (14,517 kg). With over 55 years of manufacturing experience, this hydraulic lifting equipment offers reliable performance and essential safety features for handling airplanes and helicopters effectively.
Don't have an account? Register for an account here.
Overview
TriTask A700 Aircraft Jacks. The heavier piston, turbo-prop and jet powered aircraft weighing up to 32000 lb (14517 kg) are too valuable to consider using anything less than the A700 Series Aircraft Jacks from Meyer Hydraulics. For over 55 years, we have been manufacturing aircraft jacks that continue to set the standard for safe, dependable lifting at affordable prices. This Series of professional hydraulic lifting equipment handles airplanes and helicopters with the security and features one should demand in an aircraft jack.
Features & Benefits
Spring loaded safety pin pops into the inner slide tube and rests on top of the jack’s frame to prevent the accidental lowering of the aircraft
Anti-snag round frame tube
Low height leg design provides maximum gear door clearance
Spring loaded casters allow easy transporting of the jack around the hanger without the need for the steel legs to scuff across the floor
Specifications
Series: TriTask
Diameter: 4-1/2 in
Length: 49 in
Width: 42-1/2 in
Height: 25-1/8 to 42-1/8 in
Diameter of Inner Tube: 3-1/2 in
Finish: Powder-Coated
Hydraulic Stroke: 17 in
Lifting Capacity: 32000 lb
Spring Length: 3 in
Suitable For Use With: Cessna Citation CJ1, CJ2, CJ3 (525's) and Learjet 45 Aircrafts
Don't have an account? Register for an account here.
DISCLAIMER: Product information provided “as is.” Boeing may add, change, discontinue or remove this information at any time. Product photos may not be exact match to product delivered. Seeterms & conditions.
