This two-part epoxy adhesive paste is designed for quick curing and effective gap filling. It bonds various materials, including metals and plastics, achieving full cure in 24 hours at room temperature or in 5 to 20 minutes with heat. The adhesive is light blue and comes in a 3.2 oz package.This two-part epoxy adhesive paste is designed for quick curing and effective gap fillin
Don't have an account? Register for an account here.
WARNING: This product can expose you to chemicals including CUMENE, Carbon black (airborne, unbound particles of respirable size [? 10 micrometers]), DI-N-BUTYL PHTHALATE (DBP), SILICA, CRYSTALLINE (AIRBORNE PARTICLES OF RESPIRABLE SIZE), TALC CONTAINING ASBESTIFORM FIBERS and TITANIUM DIOXIDE (AIRBORNE, UNBOUND PARTICLES OF RESPIRABLE SIZE) which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Overview
Loctite® EA 615 is a light blue, 2-part, epoxy adhesive paste that is designed for applications where fast cure rates and effective gap filling are required. Complete cure is achieved after 24 hours at room temperature, or using heat in 5 to 20 minutes (depending on temperature). The product bonds a variety of materials, including metals and plastics.
Specifications
Series: 615
Container Size: 3.2 oz
Color: Blue (Resin)/White (Hardener)
Composition: 30 to 40% Poly[oxy(methyl-1, 2-ethanediyl)], a-hydrow-hydroxy-, ether with 2, 2- bis(hydroxymethyl)-1, 3-propanediol (4:1), 2-hydroxy-3-mercap to p, 30 to 40% Quartz (SiO2), 5 to 10% Filler, 1 to 5% Talc, 1 to 5% Titanium dioxide, 1 to 5% 2, 4, 6-Tris(dimethylaminomethyl)phenol, 1 to 5% Silica, amorphous, fumed, crystal-free, 0.1 to 1% Bis[(dimethylamino)methyl]phenol (Hardener), 40 to 50% Epichlorohydrin-4,4'-isopropylidene diphenol resin, 20 to 30% Unknown naturally occurring substances, 5 to 10% Talc, 1 to 5% Dibutyl phthalate, 1 to 5% Treated fumed silica, 0.1 to 1% Allyl 2, 3-epoxypropyl ether, 0.1 to 1% Titanium dioxide (Resin)
Applicable Materials: Plastics and Metals
Mixing Ratio: 1:1
Boiling Point: 500 deg F (Hardener), 300 deg F (Resin)
Form: Past (Hardener), Viscous, Liquid (Resin)
Odor/Scent: Strong Ammoniacal (Resin)
Flash Point: >480.2 deg F (Hardener), 215.6 deg F (Resin)
Don't have an account? Register for an account here.
Product information provided "as is", and Boeing may add, change, discontinue or remove product information at any time. Product photos may not be exact match to product delivered. Seeterms & conditions.
