Scotch-Weld™ RP-2110 Repair Paste Kit, Cartridge, 485 mL, Paste, Black, Slight

Name: Scotch-Weld™ RP-2110 Repair Paste Kit, Cartridge, 485 mL, Paste, Black, Slight
Brand: 3M Aerospace
SKU: 638060-020014=32
Price: Price on request USD
Availability: InStock

3M Aerospace

Part # 638060-020014=32

This repair paste kit includes 3M™ Scotch-Weld™ RP 2110 in Duo-Pak cartridges, an applicator gun, release liner, tape, a centrifuge tube, and primer. Designed for aircraft repairs, it cures at room temperature or can be accelerated with heat, providing a durable, smooth finish suitable for erosion protection.

Buy now from

Boeing Distribution (formerly Aviall)

WARNING: This product can expose you to chemicals including Carbon black (airborne, unbound particles of respirable size [? 10 micrometers]) which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Overview

Our 3M™ Scotch-Weld™ Repair Paste 2110 is also available for purchase on its own or in a kit format. The kit includes, but is not limited to, RP 2110 repair paste in 50 mL Duo-Pak cartridges with a 1:1 mix ratio, 3M™ EPX Applicator Gun, a 3-foot roll of polyester release liner, 3M™ Polyester Tape 8403 Green, a centrifuge tube and 3M™ Single Step Primer 08682. The Duo-Pak cartridges are designed for use with our 3M™ EPX™ applicator system for fast, clean application, leaving you with a portable, easy-to-apply system. The results are a durable protective surface that provides powerful protection year after year. This system makes it suitable to repair polyurethane coatings or films commonly used for erosion protection on aircraft, including helicopter rotor blades, leading edges, engine components and other areas susceptible to erosion damage, especially from sand or rain. Our two-part polyurethane paste enables on aircraft repairs no vacuum bagging required. It can be cured at room temperature in as few as 6 hours or accelerated to 40 min using a heat blanket at a temperature of 140 deg F. Repairs are easy-to perform and yield a smooth, even appearance when complete. With a 10 min work-life, 3M Scotch-Weld™ Repair Paste 2110 provides ample time for working product into the repair area. It is tack-free, flyable and fully cured in less than 24 hours. The finished product has a flat black luster when cured in contact with the textured side of the release liner. The smooth side of the liner provides a glossy luster.

Features & Benefits

Helps reduce aircraft on ground (AOG) time and total cost can be applied directly to repair damaged areas of 3M™ polyurethane protective tape
In-place reparability helps reduce waste and downtime
Duo-Pak cartridges eliminate the need for weighing and hand-mixing
No intentionally added solvent in composition helps reduce shrinkage and rework
Urethane designed for erosion-resistance even in the harshest conditions, including rain and sand erosion
Suitable for repair of 3M Polyurethane Protective Tape and other protective tapes used on aircraft and engine components
Convenient 50 mL Duo-Pak Cartridges for easy application with minimal waste

Specifications

Container Size: 485 mL
Container Type: Cartridge
Color: Black
Composition: 70 to 90% Polyurethane Prepolymer, 10 to 15% Methylenebis(4-cyclohexyl Isocyanate), 3 to 4% Hexamethylene Diisocyanate Polymer (Part A), 55 to 85% Polyurethane Prepolymer, 5 to 25% Poly(tetramethylene Ether), <=5% 1, 4-butanediol, <5% Bis(1, 2, 2, 6, 6-pentamethyl-4-piperidinyl) Sebacate, <5% Carbon Black, <5% Phenol, 2-(2h-benzotriazol-2-yl)-6-dodecyl-4-methyl-branched and Linear, <=5% Zeolites, <1% Methyl 1, 2, 2, 6, 6-pentamethyl-4-piperidinyl Sebacate
Boiling point: >=186 deg C (Part A), >=179 deg C (Part B)
Flash Point: >=367 deg F (Part A), >=354 deg F (Part B)
Form: Paste
Odor/Scent: Slight
Shelf Life: 365 Days
Specific Gravity: 1.05
Viscosity: 190000 to 270000 cPs (Part A), 60000 to 90000 cPs (Part B)
Density: 1.05 g/mL
Suitable for Use With: 3M™ Polyurethane Protective Tape 8734NA and 8730NA, Plus a Wide Variety of Urethane Films and Coatings
Domestic/Import: Domestic

Technical Information

OSHA Approved

Application

Helicopter Rotor Blades
Leading Edges and Engine Components Applications

Technical Information

FAA Approval Code

N/R

Condition

New

Country of Origin

United States

Harmonized Tariff Schedule Code

3506100000

Lead Time (Days)

100

Shelf Life

Yes

Total Shelf Life (Days)

540

Forecasted

Yes

Dimensions (L x W x H)

8.25 x 7.50 x 1.25

Package Weight

0.25 LB

Shipping Details

Hazmat Code

ZND

ECCN

EAR99

Schedule B

3506100000

8130-3 Eligible

Hazmat

Part Explosive

Buy now from

Boeing Distribution (formerly Aviall)

DISCLAIMER: Product information provided “as is.” Boeing may add, change, discontinue or remove this information at any time. Product photos may not be exact match to product delivered. See terms & conditions.