WARNING: This product can expose you to chemicals including CARBON BLACK (AIRBORNE, UNBOUND PARTICLES OF RESPIRABLE SIZE [= 10 MICROMETERS]), ETHYLBENZENE and TITANIUM DIOXIDE (AIRBORNE, UNBOUND PARTICLES OF RESPIRABLE SIZE) which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Overview
Jet Glo® Express™ is a high performance, four component polyester urethane, designed for exterior use on high performance general aviation and commercial aircraft. This coating is qualified to SAE international's AMS 3095 and MILPRF-85285E, type I, class H.
Features & Benefits
Fast dry time
Same proven performance as Jet Glo®, but in a high solids system
Good buffing characteristics
Chemical-resistant, including Skydrol and other hydraulic fluids
Superior stain resistance
Exhibits outstanding gloss and gloss retention upon weathering
Excellent flow and leveling
Excellent Distinctness of Image (DOI)
Very low HAPs content less than 2% by weight
Free of lead and chromate hazards
Specifications
Series: 840
Container Size: 1 qt
Base Type: Polyester Urethane
Composition: 0.1 to 0.2% Ethylbenzene, 0.5 to 1% Xylene, 10 to 40% Methyl n-Amyl Ketone, 0 to 15% Amorphous Precipitated Silica, 0 to 45% Titanium Dioxide, 0 to 3% Carbon Black
Application Method: Conventional Air Spray Equipment, HVLP, Electrostatic Air Spray or Air Assisted Airless Equipment
Color: Snow White
Form: Liquid
Boiling Point: 281 to 308 deg F
Dry Time: 3 to 4 hr (Tack Free)
Flash Point: 100 to 105 deg F
Coverage Area: 800 to 960 sq-ft/gal
Recoating Time: 24 hr
Flammability Limit: 1% Lower, 7.9% Upper
Specific Gravity: 0.996 to 1.572
Shelf Life: 1095 days
VOC Content: <3.5 lb/gal
Storage Temperature: 40 to 100 deg F
Volatile Volume: 30 to 35 %
Resists: Chemical, Skydrol and Other Hydraulic Fluid
DISCLAIMER: Product information provided “as is.” Boeing may add, change, discontinue or remove this information at any time. Product photos may not be exact match to product delivered. Seeterms & conditions.
