Don't have an account? Register for an account here.
WARNING: This product can expose you to chemicals including N-METHYLPYRROLIDONE which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Overview
CM0571082 accelerator increases the speed of drying cure of Acry Glo® acrylic urethane enamel coatings. CM0571082 is the accelerator used for conventional Acry Glo® topcoat systems for opaque, metallic and Clear coat.
Features & Benefits
Speeds cure time
CM0571082 is most generally used for quick drying times on stripes, registration numbers, logos and panel repair repainting
Specifications
Container Size: 1 pt
Container Type: Can
Form: Liquid
Composition: >=50 to <=71 2% 4-Pentanedione, >=25 to <=50% 1-Methyl-2-Pyrrolidone, <1% DiButyltin Dilaurate
Flash Point: 94 deg F
Boiling Point: 284 deg F
Relative Density: 1
Vapor Density: 2.99
VOC Content: 987 g/L
Specific Gravity: 1
Viscosity: >20.5 sq-mm/s
Vapor Pressure: 0.93 kPa
Recoating Time: 24 hr
Flammability Limit: 2.2% Lower, 12.3% Upper
Evaporation Rate: 0.75
Dry Time: 8 to 10 hr Air
Storage Temperature: 40 to 100 deg F
Shelf Life: 730 days
Coverage Area: 650 sq-ft/gal Per Dry mil, 16 sq-m/L Per 25 um
Application Method: Air Spray Equipment, Graco Electrostatic Air Spray and HVLP
Don't have an account? Register for an account here.
Product information provided "as is", and Boeing may add, change, discontinue or remove product information at any time. Product photos may not be exact match to product delivered. Seeterms & conditions.
