Henkel Loctite® EA 9340 Adhesive 398459 2-Component, 2.7 oz kit
Henkel Loctite
Part # 83104=6P
|
Mfr Part # 83104
Hazmat
Hazmat
This two-component epoxy adhesive is designed for general-purpose use, featuring high-temperature performance and a strong bond. It comes in a 2.7-ounce kit, with a 40-minute application time and 24-hour curing period. The adhesive allows for sanding, drilling, and painting post-curing, and operates effectively within a temperature range of 0 to 180 degrees F.This two-component
Don't have an account? Register for an account here.
WARNING: This product can expose you to chemicals including SILICA, CRYSTALLINE (AIRBORNE PARTICLES OF RESPIRABLE SIZE) and TITANIUM DIOXIDE (AIRBORNE, UNBOUND PARTICLES OF RESPIRABLE SIZE) which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Overview
Henkel Loctite Hysol EA 9340 epoxy adhesive is a general-purpose compound that has excellent high-temperature performance. It is a strong ammonia like odored two-part formula containing a gray colored resin paste and a green colored liquid hardener. The boiling point for both resin and hardener, is rated at greater than 500 degrees F and 403.9 degrees F respectively. Resin of adhesive, has a flash point greater than 199.4 degrees F while hardener has a 215.6 degrees F. It requires an application time of 40 minutes and takes 24 hours for complete curing. This adhesive withstands a shear strength of 2300 psi at 25 degrees. The exceptional epoxy formula facilitates operator to sand, drill and paint after curing. This product comes in a 2.7-ounce tube and has a service temperature rating of 0 to 180 degrees F.
Specifications
Part Number: 83104
Manufacturer: Henkel Loctite®
Component Type: 2-Component Epoxy Adhesive (Hysol® EA 9340)
Container Size: 2.7 oz Kit
Color: Gray (resin paste), Green (hardener); mixed results in gray
Technology: Epoxy
Mix Ratio: 1:1 by weight or volume
Working Time: 90 minutes @ 25°C
Fixture Time: 6–8 hours @ room temperature
Full Cure: 24 hours @ room temperature
Shear Strength: 2,300 psi @ 25°C
Service Temperature: 0°F to 180°F (-18°C to 82°C)
Storage Temperature: 46°F to 69°F (8°C to 21°C)
Flash Point (Resin): >199.4°F (>93°C)
Flash Point (Hardener): >215.6°F (>102°C)
VOC Content: <0.05% (resin and hardener)
Applications: High-strength bonding and repairs on metal, wood, ceramics, and many plastics in chemically and thermally demanding environments
Don't have an account? Register for an account here.
Product information provided "as is", and Boeing may add, change, discontinue or remove product information at any time. Product photos may not be exact match to product delivered. Seeterms & conditions.
