CHERRY® AEROSPACE CherryMAX® Blind Rivet, 5/32 in, 1.9 in L, 0.312 in, 0.08 in
Cherry Rivet
Part # CR3213-5-10=29
Forecastable
8130-3 Eligible
Forecastable
8130-3 Eligible
This blind rivet features a locked spindle design with a mechanical locking device and an installation washer, enhancing reliability in thin sheet applications. Its large blind side bearing surface and Safe-lock collar ensure joint integrity, while the tooling system simplifies installation. Suitable for materials sensitive to damage from other rivet types.This blind rivet feat
Don't have an account? Register for an account here.
Overview
CherryMAX® is a locked spindle blind rivet with a visibly inspectable mechanical locking device and its own installation washer, which eliminates the problems resulting from worn tool anvils. It is called a bulbed fastener due to its large blind side bearing surface, developed during the installation process. CherryMAX® rivets are used in thin sheet applications and for use in materials that may be damaged by other types of blind rivets. The CherryMAX® rivet is the most reliable, high strength structural fastener with visual inspectability in the world today. It features the Safe-lock locking collar for more reliable joint integrity and meets the requirements of PS-CMR-3000. CherryMAX® tooling provides the simplest, most trouble-free installation tooling system.
Features & Benefits
A fully serrated stem with break notch, shear ring and integral grip adjustment cone
A driving anvil to ensure a visible mechanical lock with each fastener installation
A separate, visible and inspectable locking collar that mechanically locks the stem to the rivet sleeve
A rivet sleeve with recess in the head to receive the locking collar
A driving anvil is part of each CherryMAX® rivet assembly
This driving anvil eliminates wear and replacement of expendable installation tool components, considerably extending the life of the installation tool, it also allows a single pulling head to install
The CherryMAX® rivet features the Safe-lock locking collar which enhances joint integrity and reliability
The Safe-lock locking collar is preformed on the stem during a sub-assembly operation, then deforms into the rivet sleeve head recess during installation, locking the rivet sleeve and stem together
The Safe-lock locking collar is visible and inspectable after installation
The Safe-lock locking collar installs flush with the rivet sleeve head
The Safe-lock locking collar has been approved by several OEMs for use in engine inlets and components
Lightweight, non-shifting installation tools require no adjusting
Limited access capability with right angle and offset pulling heads and extensions for greater reach and split tools for special applications including automation and robotics
Bulbed blind head provides a large bearing surface area on the blind side of the structure, giving dependable results, even when installed in difficult thin sheet stack-up applications
Don't have an account? Register for an account here.
Product information provided "as is", and Boeing may add, change, discontinue or remove product information at any time. Product photos may not be exact match to product delivered. Seeterms & conditions.
