Jet Glo Express™ Aerogel Topcoat Paint, High Solid Polyester Urethane, Electra Red, 24 hr, 1 gal

Jet Glo Express™ is a high performance, four-component polyester urethane, designed for exterior use on high performance general aviation and commercial aircraft. This coating is qualified to SAE International's AMS 3095 and MILPRF-85285E, Type I, Class H.
Features
• Fast drying
• Same proven performance as Jet Glo®, but in a high solids system
• Good buffing characteristics
• Chemical-resistant, including Skydrol® and other hydraulic fluids
• Superior stain resistance
• Exhibits outstanding gloss and gloss retention upon weathering
• Excellent flow and leveling
• Excellent Distinctness of Image (DOI)
• Very low HAPS content less than 2% by weight
• Free of lead and chromate hazards
Technical Information
• SAE AMS 3095
• MIL-PRF-85285E Type I, Class H Qualified
Specifications
• Series: 840
• Container Size: 1 gal
• Base Type: High Solid Polyester Urethane
• Color: Electra Red
• Composition: 0.1 to 0.2% Ethylbenzene, 0.5 to 1% Xylene, 10 to 40% Methyl n-Amyl Ketone, 0 to 15% Amorphous Precipitated Silica, 0 to 45% Titanium Dioxide, 0 to 3% Carbon Black
• Flash Point: 100 to 105 deg F
• Boiling Point: 281 to 308 deg F
• Coverage Area: 800 to 960 sq-ft/gal
• Dry Time: 3 to 4 hr (Tack-Free), 6 to 8 hr (Tape)
• Evaporation Rate: Slower Than Ether
• Product Weight: 8.5 to 13 lb/gal
• Recoating Time: 24 hr
• Resists: Chemical, Skydrol and Other Hydraulic Fluid
• Shelf Life: 1095 days
• Specific Gravity: 0.996 to 1.572
• Storage Temperature: 40 to 100 deg F
• Vapor Density: Heavier Than Air
• VOC Content: <3.5 lb/gal
• Volatile Volume: 30 to 35 %
• Application Method: Conventional Air Spray Equipment, HVLP, Electrostatic Air Spray, Air Assisted Airless Equipment