SKYscapes® CM0850CR3GA Medium Clearcoat Activated Reducer, Can, 1 gal, Liquid, Clear, >16 hr, 0.92

SKYscapes® general aviation clearcoat is an aircraft-grade, polyester urethane designed to be used over SKYscapes® basecoat on exterior surfaces of general aviation aircraft (i.e. Non-Skydrol aircraft). This high-performance product is designed to deliver the maximum in appearance and productivity in a high-gloss, durable finish that can be easily cleaned, buffed and repaired.

FEATURES
• Designed to work over Sherwin-Williams® SKYscapes® basecoat system
• Can be applied over properly abraded Jet Glo Express™ using P600 paper
• Can be applied over express after allowing a 3 hr flash
• Can also be used over Acry Glo® conventional and Acry Glo® high-solids metallic colors
• Easy-to-mix
• Excellent flow and leveling
• Good fluid resistance
• Excellent wet-edge
• Long pot life
• Different reducer selections available for all temperatures and aircraft sizes to achieve the appearance and dry-time needed
• Machine buffable

TECHNICAL INFORMATION
• FAA-NR Approved

SPECIFICATIONS
• Container Type: Can
• Container Size: 1 gal
• Form: Liquid
• Color: Clear
• Composition: >=25 to <=50% Methyl n-Propyl Ketone, >=25 to <=50% Acetone, >=10 to <=25% p-Chlorobenzotrifluoride, <=10% Ethyl 3-Ethoxypropionate, <=10% Methoxymethylethoxypropanol Acetate, <=3% Methyl Isobutyl Ketone
• Dry Time: >16 hr
• Density: 1.01 g/mL
• Specific Gravity: 0.92
• Viscosity: <20.5 sq-mm/s
• VOC Content: 442 g/L
• Coverage Area: 685 sq-ft/gal per Dry mil, 16.8 sq-m/L per 25 um
• Vapor pressure: 24 kPa
• Relative density: 0.81
• Shelf Life: 7 Years
• Vapor density: 2
• Application Method: Electrostatic Air Spray or Air Assisted Airless and HVLP or Conventional Guns
• Boiling point: 131 deg F
• Flash Point: 17.6 deg F
• Storage Temperature: 40 to 100 deg F
• Evaporation Rate: 5.6
• Flammability Limit: 0.9% Lower, 12.8% Upper
• Product Weight: 7.63 lb/gal
• Domestic/Import: Domestic