SHERWIN-WILLIAMS Acry Glo® CM0571099GA Metallic Base Coating, Conventional Gun and HVLP, Aluminum

This specially formulated Acry Glo® metallic has been developed for the large application area where an extended wet edge is required. As with all metallic finishes, correct spray technique, properly adjusted spray equipment, good unimpeded lighting and viewing access is essential to attain even orientation.

FEATURES
• Cool metallic finish
• A proven performance coating throughout in the aviation industry
• Extended wet edge formula
• 2 or 3 singular coat application depending on color
• Quick drying
• High-resistance to chipping
• May be over coated with any Sherwin Williams® aerospace clear coat

SPECIFICATIONS
• Series: 571
• Container Size: 1 gal
• Composition: >=10 to <=25% Ethyl Acetate, >=10 to <=25% 2-Methoxy-1-Methylethyl Acetate, >=10 to <=25% Aluminum, <=10% n-Butyl Acetate, <=10% Medium Aliphatic Hydrocarbon Solvent, <=3% Xylene, Mixed Isomers, <=3% Amorphous Precipitated Silica, <=3% Toluene, <1% Light Aromatic Hydrocarbons, <1% Ethylbenzene, <=0.3% Trimethylbenzene, <=0.3% 1, 3, 5-Trimethylbenzene, <=0.3% 1, 2, 4-Trimethylbenzene
• Form: Liquid
• Flash Point: 24 deg F
• Boiling Point: 158 deg F
• Relative Density: 1.06
• Vapor Density: 3.04
• Base Type: Aluminum
• VOC Content: 596 g/L
• Specific Gravity: 1.06
• Viscosity: >20.5 sq-mm/s
• Vapor Pressure: 11.5 kPa
• Flammability Limit: 1% Lower, 13.1% Upper
• Evaporation Rate: 3.91
• Dry Time: 4 to 24 hr
• Storage Temperature: 40 to 100 deg F
• Shelf Life: 1095 days
• Coverage Area: 650 to 765 sq-ft/gal Per Dry mil, 16 to 18.8 sq-m/L Per 25 um
• Application Method: Conventional Gun and HVLP
• Product Weight: 8.82 lb/gal
• Domestic/Import: Domestic